Amano CP-3000, User Manual

Page: 18 / 76

2-8
CP-3000 User’s Guide
Note: This procedure must be performed with the power cord
disconnected from the power source.
To connect the Full Power Reserve Battery perform the following steps:
Step 1 . Remove the top cover.
Step 2 . Remove the front cover.
Step 3 . Locate the battery cable. This is a pair of red and black wires
protruding from the chassis.
Step 4 . Connect the battery cable to CN13 on the PC Board. If the
battery is properly connected, the following will occur:

the LCD will display the default time in the “As Shipped”
(12 hour) format:

an LED indicator will blink, and

the ribbon carriage will cycle
Step 5 . Replace the front cover.
Step 6 . Replace the top cover.
Note: The “As Shipped” time display format setting is configured at the
factory. If the CP-3000 should lose its configuration, the time will
be displayed in the default (24 hour) time format when the
battery is connected.