![background image](http://html.mh-extra.com/html/amano/cp-3000/cp-3000_user-manual_2918126037.webp)
CP-3000 User’s Guide
4-7
Basic Programming
Year, Month, and Date
Note:
To set the year, month, and date, you must cycle through the
following sequence of displays and save the data entered. The
data entered will not be saved if you exit the
Program Mode
or
press the
FUNCTION
key before saving.
Step 1
.
Set the
Mode Switch
to the
PROGRAM
position. The
Year
menu item will
automatically appear in the display.
Step 2
.
Press the
NO
key until the correct two
digit year (00 thru 99) is flashing in the
display. Holding down the
NO
key for
more than three seconds will increment
the number in the display by ten.
Step 3
.
When the correct year appears, press
the
YES
key. The display will
automatically move to the
Month and
Date
menu item. The first pair of digits
(month) will flash in the display.
Step 4
.
Press the
NO
key until the correct month
number (01 thru 12) appears in the
display, then press the
YES
key.
Step 5
.
The next set of digits, the
Date of the
Month
will flash in the display.
Step 6
.
Press the
NO
key until the correct date
of the month (01 thru 31) appears in the
display, then press the
YES
key.
Step 7
.
The year, month, and date entered will
flash in the display. To edit these
settings, press the
NO
key. This will
return you to the display described in
step 1. To save these settings,
press the
YES
key. When the year,
month and date are saved, the next
menu item,
Hours and Minutes
will
appear in the display.
Summary of Contents for CP-3000
