background image

 

Technaxx

®   

* User Manual 

Desk Clock with PIR & FullHD Camera TX-76+ 

 

The Declaration of Conformity for this device is under the Internet link: www.technaxx.de/ 

(in bottom bar “Konformitätserklärung”). Before using the device the first time, read the user 

manual carefully.                   

 

Service phone No. for technical support: 01805 012643 (14 cent/minute from German 

fixed-line and 42 cent/minute from mobile networks). Free Email: [email protected] 

 

IMPORTANT HINTS: Before the first use make sure you have charged the device.   

Only use battery type 18650 lithium-ion which is included in package contents. For 

other batteries we do not overtake any guarantee. Insert a MicroSD card first, 

otherwise the function of the described indicator lights does not fit the description. 

 

Keep this user manual for future reference or product sharing carefully. Do the same with 
the original accessories for this product. In case of warranty, please contact the dealer or 
the store where you bought this product.                                                        Warranty 2 years 

 

Enjoy your product * Share your experience and opinion on one of the 

well-known internet portals. 

 

Features 

  Digital  desk  clock  with  PIR  &  built-in  FullHD  camera    Home  and  office 

surveillance   Digital time display also while recording   Set up 2 alarm times 

(alarm  clock)    Video  recording  with  sound  by  motion  detection  (PIR  ~8m)     

  36  IR  LED  for  night  vision  up  to  ~6–8m 

  Recording  while  charging               

 Temperature & date display   Anti-scratch shell & anti-slippery rubber foot   

 

Note: This device supports VGA/1080p video. Use high speed memory card 

because video file size with 15 seconds recording are up to 30–70MB big. 

  With  FullHD  video  recording  on  MicroSD  32GB  you  can  store  ~1  hour  of 

footage. 

 With VGA video recording on MicroSD 32GB you can store in ~4.5 

hours of footage.   

Please notice that this will not be a permanently recording! It is just the 

amount of time that can be saved on MicroSD with 32GB. 
 
 

Summary of Contents for TX-76+









Reviews: