manualshive.com logo in svg

Altusen ALTUSEN CC2000, User Manual, Page: 40 / 271

Share
Download
Altusen ALTUSEN CC2000 User Manual Download Page 40

CC2000 User Manual

26

The Navigation Buttons

The navigation buttons move you through the items in the Sidebar as follows:

One of the advantages of using the navigation buttons instead of clicking on an 
item in the Sidebar lies in the fact that you stay on the same Panel Menu page 
as you move from item to item.

Note:

When you make a menu choice, a Panel Menu bar with further choices 
appears in the Interactive Display Panel. See

Interactive Display Panel

, 

page 27, and the table on page 28.

If, for example, you made a change to OutletA that you also wanted to make to 
OutletD, by using the navigation buttons, you could conveniently get to the 
desired location in OutletD without having to click through all the Panel Menus 
to get there.

If you access an item by clicking on it in the Sidebar, however, the opening 
page for that item appears. To make the same change to OutletD that you made 
to OutletA, you would have to start at the beginning and click through all the 
Panel Menus to get to the desired location.

Note:

If an item’s icon contains a question mark, it indicates there is a 
mismatch between the device’s information and the information for it 
stored in the CC2000’s database. See

Update

, page 105, for information 

on resolving the problem.

Button

Action

Moves to the item in the tree that is one level out and one step up from the 
current selection (its parent item). In the diagram below: If the focus were on 

OutletA

, it would move to 

PN0108RPSwitch

.

Moves to the item in the tree that is on the same level of depth and one step 
up from the current selection (its sibling item). In the diagram below:

Š

If the focus were on 

OutletB

, it would move to 

OutletA

.

Š

If the focus were on 

PN0108RPSwitch

, it would move to 

KN4132-23

.

Moves to the item in the tree that is on the same level of depth and one step 
down from the current selection (its sibling item). In the diagram below:

Š

If the focus were on 

KN4132-23

, it would move to 

PN0108RPSwitch

.

Š

If the focus were on 

OutletA

, it would move to 

OutletB

.

Moves to the item in the tree that is one level in and one step down from the 
current selection (its child item). In the diagram below: If the focus were on 

PN0108RPSwitch

, it would move to 

OutletA

.

cc2k.book  Page 26  Tuesday, December 21, 2010  4:00 PM

Summary of Contents for ALTUSEN CC2000
















































































































































































































































































Reviews:

No comments