Home
/
Altusen
/
ALTUSEN CC2000
/
User Manual

Altusen ALTUSEN CC2000, User Manual, Page: 243 / 271

Share

Page: 243 / 271

Altusen ALTUSEN CC2000 User Manual Download Page 243

Overview

229

Performing the Upgrade

After the dealers/distributors place the upgrade orders with an ALTUSEN sales
representative, they receive a confirmation and authorization email from
ALTUSEN, for example:

Your order is ready to be processed. Please go to http://xxx.xxx.x.xxx to
upgrade your key's license.

Login Information:

Username: myname3

Password: mypassword3

Order Information:

Order ID: 1017000750 (authorized number: 1605991978). This order
requests 1 more server(s) and 448 more node(s)

To perform the upgrade, do the following:

1. Follow steps 1 – 3 given for the Online Upgrade (see page 223).

2. When the upgrade Login screen comes up, log in with the Username and

Password provided in the authorization email.

cc2k.book Page 229 Tuesday, December 21, 2010 4:00 PM

«
...
241
242
243
244
245
...
»

Summary of Contents for ALTUSEN CC2000
















































































































































































































































































Reviews:

No comments