Chapter 6. Device Management
113
Power Devices, Stations, and Outlets
Selecting a Power device or one of its outlets, brings up a page with two entries
on the Panel Menu bar: Properties, and Access Rights. Each of these items is
discussed in the sections that follow.
Note:
1. When you select a Power Device (PN9108) in the Sidebar, and
expand the entries below it, the first station shown below the PN9108
entry is actually the PN9108, itself. The second station is the power
station (PN9108 or PN0108) that is daisy chained from the first
station.
2. Although additional PN9108s can be daisy chained from a first
station PN9108, since they can all be accessed with a single sign on
through the CC2000, it isn’t necessary to daisy chain them to achieve
management through a single IP address. They therefore can be
deployed independently, rather than being daisy chained.
3. The CC2000 doesn’t support the PN0108 directly. Since PN0108s are
not capable of Internet access they are only supported when daisy
chained to PN9108s.
Properties
The settings found on the
Properties
page for the device, station, or outlet are
similar to the ones described in the
section. See
Properties Page Action Buttons
The action buttons on the devices, stations, and outlets pages are the same, and
perform the same functions as those found on the KVM properties pages.
See
Properties Page Action Buttons
cc2k.book Page 113 Tuesday, December 21, 2010 4:00 PM