manualshive.com logo in svg

Altusen ALTUSEN CC2000, User Manual, Page: 99 / 271

Share
Download
Altusen ALTUSEN CC2000 User Manual Download Page 99

Chapter 6. Device Management

85

Creating Devices

Once devices have been added, you can create several types of logical device 
constructs by combining various ports as described in the sections that follow.

„

Adding an Aggregate Device

When you select 

Aggregate Device

 as an item to be added, the 

Add Aggregate 

Device

 page comes up:

Note:

See

Aggregate Device

, page 79, for an explanation of aggregate 

devices.

To add an Aggregate Device, do the following:

1. Provide a name to identify the aggregate device in the 

Name

 field.

2. (Optional) Provide a further description of the aggregate device in the 

Description

 field.

3. (Optional) Drop down the Department, Location, and/or Type list(s) and 

click on the one(s) you want the aggregate device to belong to.

4. (Optional) Provide the name and telephone number of the device 

administrator in the 

Contact Information

 field.

cc2k.book  Page 85  Tuesday, December 21, 2010  4:00 PM

Summary of Contents for ALTUSEN CC2000
















































































































































































































































































Reviews:

No comments