manualshive.com logo in svg

Altusen ALTUSEN CC2000, User Manual, Page: 226 / 271

Share
Download
Altusen ALTUSEN CC2000 User Manual Download Page 226

CC2000 User Manual

212

4. Delete all the temporary Internet-related files

To remove all the temporary Internet-related files from your computer, 
follow these steps: 

a) Start Internet Explorer.

b) On the Tools menu, click Internet Options. 

c) Click the General tab.

d) Under Temporary Internet files, click Settings.

e) Click Delete Files.

f) Click OK.

g) Click Delete Cookies.

h) Click OK.

i) Under History, click Clear History, and then click Yes.

j) Click OK.

5. Make sure that you have the latest version of Microsoft DirectX installed

For information about how to install the latest version of Microsoft 
DirectX, visit the following Microsoft Web site: 

http://www.microsoft.com/windows/directx/default.aspx?url=/windows/
directx/downloads/default.htm

6. Make sure that you have the latest version of the Java JRE installed.

For information about how to install the latest version of the JRE visit the 
Java Web site: www.java.com

cc2k.book  Page 212  Tuesday, December 21, 2010  4:00 PM

Summary of Contents for ALTUSEN CC2000
















































































































































































































































































Reviews:

No comments