manualshive.com logo in svg

Altusen ALTUSEN CC2000, User Manual, Page: 126 / 271

Share
Download
Altusen ALTUSEN CC2000 User Manual Download Page 126

CC2000 User Manual

112

This Panel Menu page is used to set the I/O attributes of the selected port:

The meanings of the attribute headings are described in the table, below:

To configure the settings, refer to the device’s User Manual to obtain the 
necessary information. When you have finished making your configuration 
settings, click 

Save

.

Heading

Meaning

Port Name

This is the name given to the port.

Exit Macro

If system macros have been made, drop down the list to select 
the one you want. When you close the KVM viewer the macro 
will be sent to the server connected to this port and the server 
will run it.

Cable

Specifies the length of the Cat5e cable that is used to connect 
the computer to the port.

OS

Specifies the operating system that the computer on the 
connected port is using.

Language

Specifies the OS language being used by the computer on the 
connected port.

Mode

This corresponds to the Access Mode setting on the original 
device (Share, Occupy, Exclusive). It defines how the port is to 
be accessed when multiple users have logged on.

Exclusive: 

The first user to switch to the port has exclusive 

control over the port. No other users can view the port. The 

Timeout

 function does not apply to ports which have this 

setting.

Occupy: 

The first user to switch to the port has control over 

the port. However, additional users may view the port’s video 
display. If the user who controls the port is inactive for longer 
than the time set in the 

Timeout

 box, port control is 

transferred to the next user to move the mouse or strike the 
keyboard.

Share: 

Users simultaneously share control over the port. Input 

from the users is placed in a queue and executed 
chronologically.

cc2k.book  Page 112  Tuesday, December 21, 2010  4:00 PM

Summary of Contents for ALTUSEN CC2000
















































































































































































































































































Reviews:

No comments