manualshive.com logo in svg

Altusen ALTUSEN CC2000, User Manual, Page: 12 / 271

Share
Download
Altusen ALTUSEN CC2000 User Manual Download Page 12

CC2000 User Manual

xii

About This Manual

This User Manual is provided to help you get the most from your CC2000 
system. It covers all aspects of installation, configuration and operation. An 
overview of the information found in the manual is provided below.

Generally speaking, chapters 1, 3, and 4 are sufficient for basic users. The other 
chapters and appendixes are only required for specialized user types. For 
example, System Administrators, should read the entire manual; Device 
Administrators, chapters 6 and 8; User Managers, chapter 7. Custom user types 
will want to read the chapters appropriate to their assigned roles.

Overview

Chapter 1, Introduction, 

introduces you to the CC2000 System. Its 

purpose, features and benefits are presented, and its front and back panel 
components are described.

Chapter 2, CC2000 Server Installation, 

provides step-by-step 

instructions for installing the CC2000 on both a Windows and Linux system.

Chapter 3, Browser Operation, 

explains how to log into the CC2000 with 

a browser, and describes how to work with the CC2000’s browser GUI 
interface.

Chapter 4, Port Access, 

shows how to access and control the devices that 

will be managed over the CC2000 network.

Chapter 5, User Management, 

describes how to: add, modify and delete 

user accounts; create user groups and assign users to them; specify device 
access rights for users and groups; and specify the user authentication method.

Chapter 6, Device Management, 

explains how to add, configure, and 

organize the devices that will be managed over the CC2000 network.

Chapter 7, System Management, 

provides an overview of the CC2000 

organizational concept, and demonstrates how to deploy, configure, and 
manage the CC2000 master and slave servers on your installation.

Chapter 8, Logs, 

explains the CC2000’s logging function and how to 

access, filter, and search the various logs that are kept by the CC2000.

Appendix A, Technical Information, 

provides technical as well as 

troubleshooting information.

Appendix B, The CC2000 Utility, 

shows how to configure a number of the 

CC2000’s parameters from the desktop of the computer that the CC2000 runs 
on, without having to invoke the browser GUI.

cc2k.book  Page xii  Tuesday, December 21, 2010  4:00 PM

Summary of Contents for ALTUSEN CC2000
















































































































































































































































































Reviews:

No comments