Home
/
Altusen
/
ALTUSEN CC2000
/
User Manual

Altusen ALTUSEN CC2000, User Manual, Page: 181 / 271

Share

Page: 181 / 271

Altusen ALTUSEN CC2000 User Manual Download Page 181

Chapter 7. System Management

167

To schedule the firmware upgrade of selected appliances, do the following:

1. Click a radio button to choose whether to use the latest upgrade file stored

with the CC2000 server, or to upgrade with a selected file that you have
uploaded.

Note:

1. The files stored with the CC2000 server, are the ones that came as part

of its firmware. These are usually the latest versions that are
compatible with the CC2000. We recommend using them unless you
have a particular reason for choosing a specific other one.

2. If you choose

Upgrade with a selected firmware file

, before

upgrading, you must first upload the upgrade file. See

, page 175, for details

2. If you choose

Upgrade with the latest stored version

(recommended), all

the devices are automatically selected for the upgrade. If you choose

Upgrade with a selected firmware file

, click the button in front of the

device type you want to upgrade.

3. Click

Next

(at the top-right of the panel).

The

Firmware Upgrade

page appears:

4. Key an appropriate name to describe the task in the

Task name

field.

cc2k.book Page 167 Tuesday, December 21, 2010 4:00 PM

«
...
179
180
181
182
183
...
»

Summary of Contents for ALTUSEN CC2000
















































































































































































































































































Reviews:

No comments