Altusen ALTUSEN CC2000 User Manual Download Page 104

Page: 104 / 271

CC2000 User Manual

2. When you have finished with this page, click

Next

. The

Configure Device

Properties

page comes up.

3. Fill in the fields according to the information provided in the table, below:

4. When you have finished with this page, click

Next

. The

Configure

Network Connectivity

page comes up.

The

Maximum number of slots

field is for information purposes and

can’t be configured on supported chassis. It can only be set on generic
chassis.

For the

Blade switching hotkey

, drop down the list to select the

sequence you prefer.

The remainder of the fields are the same as the ones discussed under

Adding an Aggregate Device

. See page 86 for details

Username /
Password

Key in a username and password that will be required to access
the blade server (via Telnet or SSH).

Note:

Use an account with administrator privileges to get

needed information.

Timeout

The amount of time to wait for a connection request to complete
before cancelling the request.

Server

Select the CC2000 unit that the Aggregate Device server is
connected under.

Field

Information

Device Information

Name:

Provide a name to identify the device.

Description:

If you wish to provide extra information to

describe the device, enter it here. This field is optional.

Department:

For organizational purposes you can

establish department categories (R&D, for example), and
assign devices to them (see

Departments, Locations and

Types

, page 127). If you wish to assign this device to a

department, drop down the list of departments (you have
previously created), and click on the one you want the
device to belong to.

Location:

For organizational purposes you can establish

location categories (West Coast, for example), and assign
devices to them (see

Departments, Locations and Types

page 127). If you wish to assign this device to a location,
drop down the list of locations (you have previously
created), and click on the one you want the device to
belong to.

Type:

Drop down the list to select the type of device it is.

Contact Information

The name and telephone number of the device
administrator. These fields are optional.

Field

Information

cc2k.book Page 90 Tuesday, December 21, 2010 4:00 PM

Summary of Contents for ALTUSEN CC2000
















































































































































































































































































Search results

Summary of Contents for ALTUSEN CC2000

Reviews:

Altusen ALTUSEN CC2000, User Manual, Page: 104 / 271

Search results

Summary of Contents for ALTUSEN CC2000

Reviews: