manualshive.com logo in svg

Altusen ALTUSEN CC2000, User Manual, Page: 252 / 271

Share
Download
Altusen ALTUSEN CC2000 User Manual Download Page 252

CC2000 User Manual

238

The LDAP administrator can check the LDAP definition with LDAP Browser. 
He should see a screen that looks like the one below:

The CC2000 Administrator gets this information to use in the 

Adding an 

External Authentication Server

 procedure (see 

LDAP/LDAPS

, page 69). In this 

example, the fields would be filled in as follows:

IP: 192.168.10.100

Port: 389

BaseDN: dc=aten,dc=com

UserRDN: ou=software

Key attribute: cn

Object class: person

Full name attribute: sn

After the LDAP/LDAPS Authentication server has been added, the CC2000 
Administrator can use the Browse button to browse all the user names in the 

software

 directory.

cc2k.book  Page 238  Tuesday, December 21, 2010  4:00 PM

Summary of Contents for ALTUSEN CC2000
















































































































































































































































































Reviews:

No comments