Altusen ALTUSEN CC2000 User Manual Download Page 42 | Manualshive

Page: 42 / 271

Altusen ALTUSEN CC2000 User Manual Download Page 42

CC2000 User Manual

28

(Continued from previous page.)

Selecting List Items

Many of the pages displayed in the Interactive Display Panel contain a list of
items (devices, users, groups, configuration files, etc.), that you will select to
perform some operation on. For example:

You can select an individual item by clicking to put a check in the
checkbox in front of its name.

You can select a group of items by clicking to put a check in the checkbox
in front of each of their names.

You can select all of the items by clicking to put a check in the checkbox at
the top of the column.

No.

Item

Description

1

Panel Menu
Bar

Refines the menu category into smaller related groupings.

If there are secondary Panel Menu pages, hovering over the
Panel Menu title causes a popup menu to appear. Click on
the menu item to go to the desired secondary page.

The items that appear in the Panel Menu bar are determined
by the user’s type, and the authorization options that were
selected when the user’s account was created.

2

Panel Menu
Title Bar

Describes the Panel Menu category.

If there are secondary Panel Menu pages, an arrow icon

indicates so. Click the Down-Arrow icon

to go to the next

page in the sequence; click the Up-Arrow

icon to go to

the previous page in the sequence.

3

Action-Input
Area

A button or input box displays here directing you to take an
action (Save, Delete, Add, Next, etc.), with regard to the
current page.

cc2k.book Page 28 Tuesday, December 21, 2010 4:00 PM

«
...
40
41
42
43
44
...
»

Summary of Contents for ALTUSEN CC2000
















































































































































































































































































Reviews:

No comments