manualshive.com logo in svg

Altusen ALTUSEN CC2000, User Manual, Page: 195 / 271

Share
Download
Altusen ALTUSEN CC2000 User Manual Download Page 195

181

Chapter 8

Logs

Overview

The CC2000 keeps an extensive record of all the transactions that take place on 
its installation. The 

Logs 

page provides a powerful array of filters and functions 

that allow you to view and export the log file data, as well as be informed by 
email of specified events as they occur.

CC Logs

Logs

When you click the Logs tab, the CC2000 opens to the default 

CC Logs

 page 

which looks similar to the page, below:

Š

The default layout shows information concerning all of the events that 
have taken place on all the logs on the entire CC2000 installation, 
displayed in reverse chronological order.

Š

You can change the sorting order of the display by clicking the column 
headings.

Š

You can reverse the order of a selected heading by clicking it a second 
time.

cc2k.book  Page 181  Tuesday, December 21, 2010  4:00 PM

Summary of Contents for ALTUSEN CC2000
















































































































































































































































































Reviews:

No comments