Chapter 6. Device Management
109
Modifying a User’s or Group’s Rights
To modify a user’s or group’s rights to the port, do the following:
1. In the
Configuration Rights
column that corresponds to the user or group
you want to modify, click on the arrow; make your new selection; then
click
Close
.
2. In the
Access Rights
column that corresponds to the user or group you
want to modify, click on the arrow; make your new selection; then click
Close
.
3. click
Save
(at the top-right of the panel).
Deleting a User’s or Group’s Access Rights
To remove a user’s or group’s access rights to a port, do the following:
1. Click to put a check in the checkbox in front of the names of the users or
groups that you want to remove.
2. Click
Delete
(at the top-right of the panel).
Action Buttons
In addition to Add, Delete, and Save, there is an
Update All
button (at the top-
right of the panel). Clicking that button takes you to a page that lets you set the
configuration and access rights to the port for all users and groups.
cc2k.book Page 109 Tuesday, December 21, 2010 4:00 PM