manualshive.com logo in svg

Altusen ALTUSEN CC2000, User Manual, Page: 150 / 271

Share
Download
Altusen ALTUSEN CC2000 User Manual Download Page 150

CC2000 User Manual

136

Monitor

The 

Monitor

 Panel Menu item offers another way of accessing one of the 

CC2000 servers on your installation:

The page opens to a live map view. It allows you to see at a glance all the 
CC2000 servers on the installation, and their online/offline status. The master 
is at the top; the slaves are in a row (or rows) below the master. The online 
status is indicated by whether the icon shows a green traffic light or not.

Click an icon to bring up the server’s 

Properties

 page. This is the same page 

that comes up when you click the server’s name in the Sidebar, or on the 

CC 

Server

 Interactive Display panel list (see the screenshot on page 133).

Note:

When this page is open, the Timeout setting for the user (see 

Adding 

User Accounts

, page 50), is ignored – the user will not be timed out.

You can create map views and save them as Favorites: click 

Add

; key a name 

in the 

Favorite Name

 field; then click 

Save

. To return to a view, select it from 

the drop down list. To delete a view, select it from the drop down list, then click 

Delete

.

cc2k.book  Page 136  Tuesday, December 21, 2010  4:00 PM

Summary of Contents for ALTUSEN CC2000
















































































































































































































































































Reviews:

No comments