manualshive.com logo in svg

Altusen ALTUSEN CC2000, User Manual, Page: 41 / 271

Share
Download
Altusen ALTUSEN CC2000 User Manual Download Page 41

Chapter 3. Browser Operation

27

Tree View Considerations

Š

Only items a user is authorized to access appear in the Sidebar tree view.

Š

A plus (+) sign in front of an item means that there are additional items 
nested inside of it. Click the plus sign to expand the view and show the 
nested items.

Š

The plus sign changes to a minus sign (-)when an item is expanded. Click 
the minus sign to collapse the view and hide the nested items.

Š

For devices, if the device is on line, its icon is in color; if it is off line, its 
icon is gray.

Note:

User’s can configure the way devices and ports display in the Sidebar 
tree view. See

User Preferences

, page 47, for details.

Interactive Display Panel

Overview

The Interactive Display Panel (also referred to as the main panel) is your main 
work area. The screens that appear reflect your menu choices and Sidebar item 
selection. The reason it is called an interactive display panel, is that in addition 
to displaying the contents of your menu choices, it is also a work area where 
you can make configuration settings and perform actions on selected devices.

An explanation of a typical interactive display panel is given below:

cc2k.book  Page 27  Tuesday, December 21, 2010  4:00 PM

Summary of Contents for ALTUSEN CC2000
















































































































































































































































































Reviews:

No comments