Altigen MAX Communication Server ACC 6.0, Administration Manual

Page: 284 / 453

Chapter 22: Workgroup Configuration
270
MAXCS ACC 6.0 Administration Manual
WARNING!
Listening in to or recording a conversation without the consent of one or
both parties may be a violation of local, state and federal privacy laws. It
is the responsibility of the users of this feature to assure they are in
compliance with all applicable laws.
•
Auto record to central location —records all workgroup inbound and outbound
calls, which are saved to a central location (defined in Recording Configuration on
the
System menu—see page 103); this option requires that either a shared
Concurrent Recording Session license is available or that a Dedicated Recording Seat
license is assigned to each workgroup member (configured in Extension
Configuration).
•
Record on demand to central location —records calls on demand, which are
saved to a central location (defined in Recording Configuration on the System
menu—see page 103); this option requires that either a shared Concurrent
Recording Session license is available or that a dedicated Recording Seat license is
assigned to each workgroup member (configured in Extension Configuration).
•
Record on demand to extension VM —records calls on demand, which are saved
to the agent’s voicemail box.
Note:
When retrieving voice mail as an e-mail, if the voice mail file has a recorded
file attached, the recorded file is not forwarded in the e-mail.
•
Insert Recording Tone —plays a recording beep to alert the parties that the
conversation is being recorded.
•
Record X out of 10 calls —If recording to a central location, automatically records
incoming and outgoing workgroup calls, as specified. (The default is to record all
workgroup calls.)
To see this option, click the
Agent Recording Management button. This opens the
following window:
For each agent you can change the option Record N out of 10 calls . For example,
if you set to record 4 out of 10 calls, the 1st-4th and 11th-14th, and so on, will be
recorded. Using this example, in the following table the shaded calls will be
recorded:
You can
change
these
values