Altigen MAX Communication Server ACC 6.0, Administration Manual

Page: 415 / 453

Chapter 30: Tools and Applications
MAXCS ACC 6.0 Administration Manual 401
Work/Hunt Group Converter
The MAXCS Work/Hunt Group Converter allows you to convert workgroups to hunt
groups or hunt groups to workgroups.
To launch the Work/Hunt Group Converter, select
Services > Utilities > Convert
Work/Hunt Group . The Work/Hunt Group Converter window opens.
Figure 8. Work/Hunt Group Converter
Workgroups and hunt groups are listed on the left side of the window, member agents
and non-agents are listed on the right side.
The
Work/Hunt Group Converter can be used to convert:
•
Agent to Non-Agent —If an agent belongs to any workgroup, it cannot be
converted to a non-agent. When an agent is converted to a non-agent, all
workgroup-related parameters will be cleared, including wrap-up time, inter-call
delay, and outgoing workgroup number.
To convert, select the agent (indicated by YES in the
Agent field) and click the
Convert Agent button or double-click the agent.
•
Non-Agent to Agent —To convert, select the non-agent (indicated by NO in the
Agent field) and click the Convert Agent button or double-click the non-agent.
Make sure you have enough agent licenses.
•
Convert Workgroup to Hunt Group —when a workgroup is converted to a hunt
group, its members are not changed, but the following parameters are cleared,
including:
–
voice recording setting
–
queue time threshold
–
queue overflow settings
–
queue announcement
–
agent announcement