Alcatel Speed Touch 591s, Technical User'S Manual

Page: 91 / 184

8 — Configuring the V.35/X.21 CE user port
Speed Touch 591s Technical Practices 8-5
February 2001 90-8785-01
Procedure 8-6 Configuring inverted clocking
CONFIG — OBJECT — PORT — <U>
↵
— OPTIONS — CLOCKING — TX_INVERT —
ENABLE or DISABLE*
Procedure 8-7 Configuring the clock rate
CONFIG — OBJECT — PORT — <U>
↵
— OPTIONS — CLOCKING — CLOCK_RATE —
n*64kb/s <value>
↵
where value is the value of n (1 to 32), used as a multiplying factor for 64 kb/s
8.2 Configuring user port circuit parameters
The softkey structure for configuring the circuit on the user port is shown below.
SK002465
PORT <U>
↵
AAL_SERVICE NUM_DATA_OCT
PLAYOUT_BUFF <value>
↵
<value>
↵
CIRCUIT
OBJECT
CONFIG
PAD_OCTET_VAL <value>
↵
ALL
UDT
SDT_w/BASIC
Caution —
When any of the circuit parameters are changed, all
configured connections are removed, and the user port reverts to the
disabled state. Refer to sections 9.1 and 13.3 for details on how to
configure connections and enable the user port.