Alcatel Speed Touch 591s, Technical User'S Manual

Page: 68 / 184

6 — Configuring frame relay connections
6-2 Speed Touch 591s Technical Practices
90-8785-01 February 2001
6.1 Configuring frame relay connection options
The softkey structure for configuring frame relay connection options is shown
below.
The following procedures describe how to select frame relay connection endpoints,
display connection information, and disconnect endpoints.
Frame relay connection endpoints
Connections are created between the user and network ports, and are thus internal to
the unit. A connection is identified by its two endpoints—one at the user port, the
other at the network port. The two endpoints are selected as described below. Refer
to Alcatel 7350 ASAM Technical Practices for further information on endpoint
identifiers.
SK002119
CONNECT <endpoint>
↵
SHOW_GROUP TRAFFIC
FROM_1—>2
DISCONNECT INTERWORKING TO_ENDPOINT <endpoint>
↵
CONFIG
RATES POLICING FR_SERV_CAT
<profile no.>
↵
STANDARD
NIW_DLCI <dlci>
↵
CLP_MAPPING DE_MAPPING PVC_MGMNT
EFCI_MAPPING CLP_MAPPING DE_MAPPING TRANSPARENT* TRANSLATED
SERVICE_IWF
NETWORK_IWF