Alcatel Speed Touch 591s, Technical User'S Manual

Page: 121 / 184

12 — Configuring T1/E1 CE channel groups
Speed Touch 591s Technical Practices 12-3
February 2001 90-8785-01
12.2 Creating channel groups
Channel groups can be created for structured T1 and E1 CE ports. Channel groups
allow several channels to be grouped together so that they function as a single
connection endpoint.
Procedure 12-1 Creating a channel group
CONFIG — OBJECT — CHANNELGROUP — <endpoint>
↵
where endpoint is U;group, and group is a channel group identifier—CG1 to CG24 for a
T1 port and CG1 to CG31 for an E1 port
12.3 Adding channels
Channels can be added to channel groups. Table 12-1 lists the channel information
displayed for a group.
Table 12-1 Channel group information
The channels in the channel group can be contiguous or noncontiguous; however, the
channels must maintain their end-to-end time ordering; see Alcatel 7350 ASAM
Technical Practices for details.
A channel can be assigned only to one channel group. For channel groups configured
for CAS, timeslots 0 and 16 are reserved for signaling and cannot be added to a
channel group. For E1 CE channel groups configured for BASIC, timeslot 0 is
reserved for signaling and cannot be added to a channel group.
Field Description
TS # The timeslot number.
Ch # The channel number.
Chan Grp The channel group identifier.