Alcatel Speed Touch 591s, Technical User'S Manual

Page: 125 / 184

12 — Configuring T1/E1 CE channel groups
Speed Touch 591s Technical Practices 12-7
February 2001 90-8785-01
12.8 Configuring the number of data octets
The number of data octets in one cell can be configured for each channel group. The
number of data octets can be configured from 4 to 44, in multiples of 4. The higher
the number of data octets, the lower the ATM cell rate and the longer the ingress
delay.
When the number of data octets for each cell is changed, the system calculates and
displays the cell rate and delay.
When the ALL softkey is selected, every available octet in the cell payload contains
user data. This option produces the lowest ATM cell rate and the highest delay.
For more information about cell rates, see Alcatel 7350 ASAM Technical Practices.
Procedure 12-7 Configuring the number of data octets
1 Enter:
CONFIG — OBJECT — CHANNELGROUP — <endpoint>
↵
— OPTIONS —
NUM_DATA_OCT
where endpoint is U;group, and group is a channel group identifier—CG1 to CG24
for a T1 port and CG1 to CG31 for an E1 port
2 Specify the number of data octets.
a To use only some of the available payload octets, enter:
<octet>
↵
where octet is a multiple of 4 from 4 to 44
b To use all of the available payload octets, select:
ALL
Note —
Disconnect the channel group before you change the number
of data octets; see section 12.9.