Alcatel Speed Touch 591s, Technical User'S Manual

Page: 80 / 184

7 — TCA profiles
7-6 Speed Touch 591s Technical Practices
90-8785-01 February 2001
Procedure 7-2 Configuring FRCC-type TCA profiles
To configure the value for SCT as 75% for profile 1 and to enable the profile:
1 Enter:
CONFIG — FRAME_SERV — THRESHOLDS — SCT — <75>
↵
2 Select:
TCA_PROFILE — CONGESTION — PROFILE_NUM
At this stage the profiles that are configured can be displayed by pressing <Esc>
<1>.
3 Enter:
<1>
↵
4 Select:
ENABLE
Profile 1 is now enabled for monitoring system congestion.
Procedure 7-3 Displaying FRCC-type TCA profiles
1 Enter:
CONFIG — SYSTEM — TCA_PROFILE — <FRCC>
↵
Figure 7-1 shows the list of FRCC-type TCA profiles for the Speed Touch 591s that
is displayed on the NMTI.
2 To list the parameter thresholds for a profile, enter:
<profile_number>
↵
where profile_number is the number of the profile
Figure 7-2 shows the parameter threshold settings for the profile that are displayed
on the NMTI.