Alcatel Speed Touch 591s, Technical User'S Manual

Page: 26 / 184

1 — Introduction
1-4 Speed Touch 591s Technical Practices
90-8785-01 February 2001
The Speed Touch 591s provides:
•
a network port (RJ45 connector) for connection to the telephone line
•
a T1 port (RJ45 connector) for connection to data devices or networks (T1 version
only)
•
an E1 port (RJ45 connector) for connection to data devices or networks (E1
version only)
•
a user port (DB37 connector) for connection to data devices or networks
•
a serial port (RJ45 connector) for connection to a VT100 terminal for local node
management sessions
•
a power cable connector
The Speed Touch 591s has its own NMTI, which can be accessed either locally on
the serial port, or remotely using a 5620 Network Manager.
Table 1-1 lists the power requirements for the Speed Touch 591s.
Table 1-1 Speed Touch 591s power requirements
1.3 Compatibility
The Speed Touch 591s is compatible with:
•
Release 4.1 (and later) of the 5620 Network Manager
•
Release 1.0 (and later) of the 7350 ASAM
•
Release 4.1.10 (and later) of the 7300 ASAM
Note —
The E1 circuit emulation version of the Speed Touch 591s is
designed for use with 120
Ω
E1 twisted pair cabling. An external 120
Ω
/75
Ω
twisted pair or coaxial cable adapter must be fitted when
using 75
Ω
E1 coaxial cabling.
Specification Value
Power consumption 11.5 W
Voltage range 90 to 132 V ac, 60 Hz
(North America)
180 to 264 V ac, 50 Hz
(Rest of the world)
Note — The Speed Touch 591s can be managed via CPSS using the
5620 Network Manager only when it is connected to a 7350 ASAM.
When the Speed Touch 591s is connected to a 7300 ASAM, the only
management operations that can be carried out are Telnet and
software downloads. Software must be downloaded over ATM
connections from workstations not running CPSS.