Alcatel Speed Touch 591s, Technical User'S Manual

Page: 116 / 184

11 — Configuring T1/E1 CE connections
11-2 Speed Touch 591s Technical Practices
90-8785-01 February 2001
11.1 Connection options
The softkey structure for configuring connection options is shown below.
Selecting the two connection endpoints
Connections in the Speed Touch 591s are created between the user and network
ports, and are thus internal to the Speed Touch 591s. A connection in the Speed
Touch 591s is identified by its two endpoints—one at the user port, the other at the
network port. The two endpoints are selected as described below. Refer to Alcatel
7350 ASAM Technical Practices for further information on endpoint identifiers.
Procedure 11-1 Selecting the two connection endpoints
1 Enter:
CONFIG — CONNECT — <endpoint>
↵
where endpoint is U in UDT mode or U;group in SDT mode, and group is a channel
group identifier—CG1 to CG24 for a T1 port and CG1 to CG31 for an E1 port
2 Enter:
TO_ENDPOINT — <endpoint>
↵
where endpoint is in the format <N;0/vci>, and vci is a VCI number in the range 32
to 157
SK002853
CONFIG
CONNECT <endpoint>
↵
SHOW_GROUP DISCONNECT TO_ENDPOINT <endpoint>
↵