Alcatel Speed Touch 591s, Technical User'S Manual

Page: 51 / 184

4 — Configuring generic node parameters
Speed Touch 591s Technical Practices 4-7
February 2001 90-8785-01
Procedure 4-9 Configuring the
control VP/VC
HOUSE — MORE — IP_ADDRESSES — CTL_VP/VC — <0/vci>
↵
where vci is a VCI number in the range 32 to 158
Applying the IP address configuration
The IP address parameters are not applied until they have all been correctly
configured individually, and the configuration has been applied globally.
Procedure 4-10 Applying the IP address configuration
HOUSE — MORE — IP_ADDRESSES — PROG_TO_CURR
Configuring level 0 access
The system has six access levels, numbered 0 to 5. Enter your access level and
password when you log in. Refer to Alcatel 7350 ASAM Technical Practices for
further information on access levels. Level 0 access allows read-only access to all
node management functions on the Speed Touch 591s and does not require a
password. Only a level 5 user can configure level 0 access.
Procedure 4-11 Configuring level 0 access
HOUSE — MORE — LEVEL_0 — ENABLE* or DISABLE