Alcatel Speed Touch 591s, Technical User'S Manual

Page: 46 / 184

4 — Configuring generic node parameters
4-2 Speed Touch 591s Technical Practices
90-8785-01 February 2001
4.1 Node parameter configuration
The softkey structure for configuring node parameters is shown below.
Table 4-1 lists the node parameters that can be configured on the Speed Touch 591s.
Table 4-1 Node parameters
Note
(1)
This softkey is displayed only when the DSLAM type is configured as 7300.
SK002933
HOUSE
MORE...
CTLIP <ipaddress>
↵
DESTIP <ipaddress>
↵
SUBNET_MASK <mask>
↵
CTL_VP/VC <vpi/vci>
↵
PROG_TO_CURR
SESS_TIMEOUT CHNG_PSSWD <password>
↵
IP_ADDRESSES DSLAM_TYPE LEVEL_0
ENABLE*/
DISABLE
7350* 7300
SER_PORT_1
BAUD_RATE
NODE_NAME <name>
↵
HOURS <hours>
↵
DEFAULT
MINUTES <minutes>
↵
Parameter Options Default value
Baud rate 600, 1200, 2400, 4800, 9600, 19200 9600
Node name 8- to 12-character string —
Session timeout 1 min to 24 h 12 h
Password 15-character string mainstreet
Level 0 access Enable, Disable Enable
DSLAM type 7350, 7300 7350
Control IP address
(1)
IP address of the Speed Touch 591s 0.0.0.0
Destination IP address
(1)
IP address of gateway 0.0.0.0
Subnet mask
(1)
Subnet mask for the domain in which the
Speed Touch 591s and gateway are
located 255.255.255.0
Control VP/VC
(1)
VP/VC on which the control signals will
be carried 0/32