Alcatel Speed Touch 591s, Technical User'S Manual

Page: 55 / 184

5 — Configuring frame relay port parameters
Speed Touch 591s Technical Practices 5-3
February 2001 90-8785-01
Table 5-1 lists the user port parameters that can be configured.
Table 5-1 User port parameters
Note
(1)
When the test mode lead is set to Ind_maint, it is controlled by software-initiated maintenance. The
lead is forced on when a maintenance action such as a loopback is applied to the unit, and it is forced
off when all maintenance actions are removed.
Procedure 5-1 Naming the user port
CONFIG — OBJECT — PORT — <U>
↵
— NAME — <name>
↵
where name contains a maximum of 15 characters excluding space, tab, period, question
mark, and percent sign
Parameter Options Default value
Name 15-character string —
Clock rate 9.6, 19.2, 48, and
n
×
64 (n = 1 to 32)
512 kb/s
Interface type V.35, V.36/TIA/EIA-449,
X.21 V.35
Clocking mode DCE slave, DCE external
(V35/V36 only) DCE slave
Clock inversion Enable, Disable Disable
Control leads C
(X.21) Active, Assume On,
Assume Off Active
DTR
(V.35/V.36) Active, Assume On,
Assume Off Active
RTS
(V.35/V.36) Active, Assume On,
Assume Off Active
DSR (V.35/V.36) Force On, Force Off Force On
DCD (V.35/V.36)
I (X.21) Active, Force On, Force
Off Active
CTS (V.35/V.36) Active, Force On, Force
Off Active
TM (V.35) Force On, Force Off,
Ind_maint
(1)
Ind_maint