Alcatel Speed Touch 591s, Technical User'S Manual

Page: 106 / 184

10 — Configuring the T1/E1 CE port
10-8 Speed Touch 591s Technical Practices
90-8785-01 February 2001
Alarm time
For ESF framing on the T1 port and basic framing on the E1 port, the alarm
declaration and clearing times can be configured from 0.1 to 30 s in increments of
0.1 s.
Procedure 10-6 Configuring the alarm time
1 Enter:
CONFIG — OBJECT — PORT — <U>
↵
— OPTIONS — PHYSICAL — ALARM_TIME
2 Enter:
DECLARE or CLEAR or RDI_CLEAR
For DECLARE, go to step 3.
For CLEAR, go to step 4.
For RDI_CLEAR, go to step 5.
3 For the declare time, enter:
<declare>
↵
where clear is from 0.1 to 30 s, in increments of 0.1 s
4 For the clear time, enter:
<clear>
↵
where clear is from 0.1 to 30 s, in increments of 0.1 s
5 For RDI clearing, select:
ON_LOF_CLEAR or ON_RESYNCH
Zero suppression
The T1 CE port can be configured to use the B8ZS or JB7 suppression mechanism.
If the port is configured for UDT or monitored UDT AAL service mode, JB7 is not
available. The default is B8ZS encoding.
Procedure 10-7 Configuring zero suppression
CONFIG — OBJECT — PORT — <U>
↵
— OPTIONS — PHYSICAL — MORE —
ZERO_SUPPRESS — B8ZS* or JB7