Alcatel Speed Touch 591s, Technical User'S Manual

Page: 63 / 184

5 — Configuring frame relay port parameters
Speed Touch 591s Technical Practices 5-11
February 2001 90-8785-01
Procedure 5-13 Configuring pacing
CONFIG — OBJECT — PORT — <U>
↵
— STREAM — OPTIONS — PACING — <value>
↵
where value is a pacing rate in kb/s
HDLC
The Speed Touch 591s user port can be configured to support either standard or
inverted HDLC. The minimum number of flags transmitted between HDLC frames
can also be configured. The default setting is 1 flag (back-to-back frames).
Procedure 5-14 Configuring HDLC
CONFIG — OBJECT — PORT — <U>
↵
— STREAM — OPTIONS — HDLC — INVERTED or
STANDARD* or NUM_FLAGS — <number>
↵
where number is the number of HDLC flags between frames, in a range from
1 to 10
Procedure 5-15 Configuring the PVC management type
1 Enter:
CONFIG — OBJECT — PORT — <U>
↵
— STREAM — OPTIONS — PVC_MGMNT —
TYPE
2 Select:
NONE or LMI or ANNEX_A or ANNEX_D or AUTO-NET
3 Select:
a For LMI:
USER or NETWORK or NETEXT
b For ANNEX_A or ANNEX_D:
USER or NETWORK or BIDIR