Alcatel Speed Touch 591s, Technical User'S Manual

Page: 69 / 184

6 — Configuring frame relay connections
Speed Touch 591s Technical Practices 6-3
February 2001 90-8785-01
Procedure 6-1 Selecting the two frame relay connection endpoints
1 Enter:
CONFIG — CONNECT — <endpoint>
↵
where endpoint is in the format <U;S1/Ddlci> or <U;Ddlci>, and dlci is a value from
16 to 1007 (S1 is implicit; it does not have to be specified)
2 Enter:
TO_ENDPOINT — <endpoint>
↵
where endpoint is in the format <N;0/vci>, and vci is a VCI number from 32 to 157
Connection information
Connection information can be displayed for the endpoints of the PVCs. For further
details on the connection information available, refer to Alcatel 7350 ASAM
Technical Practices.
Procedure 6-2 Displaying connection information
1 Select one of the two endpoints:
CONFIG — CONNECT — <endpoint>
↵
where endpoint is in the format <U;S1/Ddlci> or <U;Ddlci>, and dlci is a value from
16 to 1007, or <N;0/vci>, and vci is a VCI number from 32 to 157
2 Select:
SHOW_GROUP
3 If there are too many connections to fit on the screen, select an option to view the
other connections.
a For connections further down the list, select:
PAGE_DOWN
b For connections near the beginning of the list, select:
PAGE_UP
4 To display the original connection information, select:
SHOW_CONNECT