Alcatel Speed Touch 591s, Technical User'S Manual

Page: 108 / 184

10 — Configuring the T1/E1 CE port
10-10 Speed Touch 591s Technical Practices
90-8785-01 February 2001
10.3 Configuring the E1 port physical options
The softkey structure for configuring the physical options for the E1 port is shown
below.
Table 10-4 lists the E1 port parameters that can be configured.
Table 10-4 E1 port physical parameters
Note
(1)
Not applicable when the AAL service type is configured as UDT
The procedures for configuring alarm declaration and clearing times and CRC
framing are the same as those used for the T1 port; refer to section 10.2 for details.
SK002854
CAS
CONFIG
OBJECT
OPTIONS
PHYSICAL
PORT <U>
↵
31_CHANNEL
SIGNALING ALARM_TIME SYNCHRONIZE CRC_FRAMING
NETWORK
ON* OFF
DECLARE <value>
↵
CLEAR <value>
↵
Parameter Options Default value
Signaling
(1)
CAS, 31_CHANNEL CAS for SDT_CAS mode
31_CHANNEL for SDT_BASIC mode
Alarm declaration 0.1 to 30 s, in increments of 0.1 s 0.8 s
Alarm clearing 0.1 to 30 s, in increments of 0.1 s 10 s
CRC framing
(1)
ON, OFF ON