Alcatel Speed Touch 591s, Technical User'S Manual

Page: 49 / 184

4 — Configuring generic node parameters
Speed Touch 591s Technical Practices 4-5
February 2001 90-8785-01
Configuring the DSLAM type
The Speed Touch 591s can be configured to be compatible with either of two types
of DSLAM—DSLAMs that support CPSS or DSLAMs that do not support CPSS.
If the Speed Touch 591s is connected to a 7350 ASAM, configure the DSLAM type
as 7350. If the Speed Touch 591s is connected to a 7300 ASAM or any other
DSLAM, configure the DSLAM type as 7300.
Procedure 4-5 Configuring the DSLAM type
HOUSE — MORE — DSLAM_TYPE — 7350* or 7300
Configuring the control IP address
The control IP address is the IP address of the Speed Touch 591s. It can be
configured manually when the Speed Touch 591s is operating with a 7300 ASAM.
Procedure 4-6 Configuring the
control IP address
HOUSE — MORE — IP_ADDRESSES — CTLIP — <ipaddress>
↵
where ipaddress is the IP address of the Speed Touch 591s in the decimal format #.#.#.#
and where # is in the range 0 to 255
Note — Configuration of this parameter does not affect SHDSL
interoperability—it only specifies how the Speed Touch 591s
communicates with the DSLAM for management purposes.
Note — The new IP address is not applied until the destination IP
address, subnet mask, and control VP/VC have been correctly
configured individually, and the configuration has been applied
globally—see procedure 4-10.