Ab o u t t hi s M anu al
C o m m i ssi o n i n g M an u al
Referenced Documentation
The following documentation is referenced in some places in this manual:
WipManage User’s Guide
: This manual assumes that you are familiar with
WipManage’s GUI. Airspan recommends that you refer to the
WipManage
User’s Guide
for descriptions on using WipManage.
WipConfig User’s Guide
: This manual assumes that you are familiar with
WipConfig’s GUI. Airspan recommends that you refer to this manual when
performing initial configuration procedures.
ASWipLL Hardware Installation Guide
: The manual describes serial
configurations of ASWipLL devices. Therefore, Airspan recommends that you
refer to the
ASWipLL Hardware Installation Manual
for detailed description of
connecting the cables for serial (or IP network) connections.
Organization of this Manual
This manual is organized into the following chapters:
Chapter 1, "
Introduction
": provides an overview of the ASWipLL system.
Chapter 2, "
Installing ASWipLL Management Software
": provides step-by-
step instructions for installing WipManage and WipConfig.
Chapter 3, "
Initial Configuration
": provides step-by-step instructions for
initializing BSDU, BSR/PPR, and SPR/IDR devices. In addition, this chapter
also describes the procedure for establishing a network link.
Chapter 4, "
Establishing BSR-SPR Link in Router Mode
": provides step-by-
step instructions for establishing communication link between the BSR/PPR and
SPR based on IP routing.
Chapter 5, "
Establishing BSR-SPR Link in Bridge Mode
": provides step-by-
step instructions for establishing communication link between the BSR/PPR and
SPR based on transparent bridging.
xviii
Airspan Networks Inc.
01040311-07
