I ni ti al Con fi gu r atio n
C o m m i ssi o n i n g M an u al
4.
a.
Apply factory default settings to the SPR by performing the following:
On the toolbar, click the
Set Factory Default
button.
A Warning message box appears.
Figure
3-14: Warning message box for setting defaults
b. Click
Yes
to confirm applying factory defaults to the device.
A Warning message box appears, requesting you to confirm device reset.
Figure
3-15: Warning message box for resetting device
c.
5.
Click
Yes
to reset the device with default settings.
WipConfig applies default settings to the SPR.
In the
Network Configuration
group, enter the following fields:
Eth IP Address
: SPR’s IP address (e.g.
10.0.0.20
)
Eth Subnet Mask
: SPR’s subnet address (e.g.
255.255.255.240
)
Default Gateway
: SPR’s default gateway’s IP address (if relevant)
3-18
Airspan Networks Inc.
01040311-07
