C o m m i ssion ing M anu al
C o n f i g u r i n g R ad i o T r an smi t P o w er
3.
a.
b.
c.
4.
5.
In the
SPR
group:
Select the Permit Power Management Mode check box.
Select the
Power Management Mode Active
check box.
On the
BSR Receive Power
ruler, move the slide ruler to the desired
received signal strength (e.g.
–68 dBm
) that you want the BSR to obtain for
the SPRs (i.e. this is measured at the BSR).
In the
BSR
group, select the
Power Management Mode Active
check box.
Click
Apply
.
Figure
19-8: Multi Apply confirmation box
6. Select the
Apply Changes to All SPRs
and
Apply Also BSR Device
options,
and then click
Apply
.
Figure
19-9: Notice message box
7. Click
Ok
.
01040311-07
Airspan Networks Inc.
19-9
