D ef in ing V LAN s
C o m m i ssi o n i n g M an u al
Figure
14-10: Device Addresses Table dialog box
3.
4.
5.
6.
7.
8.
1.
In the
IP Address
field, enter the BSR’s virtual IP address for this gateway.
In the
Subnet Mask
field, enter the BSR's virtual subnet mask for this gateway.
In the
Gateway
field, enter the gateway’s (router’s) IP address.
Select the
VLAN ID
check box, and then in the spin box, enter the VLAN ID to
be routed to this gateway.
Click
OK
. The defined gateway VLAN appears in the Addresses Table/802.1Q
dialog box.
Click
Apply
, and then
Close
.
14.2.1.5. Task 4: Define SPR VLAN ID(s)
Each SPR can support only one VLAN ID, except for SPRs that are attached to the
ASWipLL SDA-4S/VLtag switch, which provides up to four VLAN IDs, each
corresponding to a port (1 to 4).
To define a VLAN ID for an SPR:
In the SPR Zoom window, from the Configuration menu, point to Network, and
then choose
802.1Q (VLAN)
.
14-10
Airspan Networks Inc.
01040311-07
