E st abli shing BS R - SP R L in k w ith Au to Co nn ect
C o m m i ssi o n i n g M an u al
8.2.4.2. Using WipManage
The following procedure describes how to configure AutoConnect for SPRs
currently connected to a BSR. This is performed using WipManage. In our example,
the SPRs disconnect from BSR (
10.0.0.10
) and then reconnect with AutoConnect to
the BSR (also
10.0.0.10
) with the strongest RF signal.
To enable AutoConnect using WipManage:
In the BSR Zoom window, from the MultiDevices menu, choose
AutoConnect
.
1.
Note:
You can also redefine individual SPRs for AutoConnect in the SPR
Zoom window, by simply choosing the
AutoConnect
command from the
Configuration menu.
8-20
Airspan Networks Inc.
01040311-07
