AIRIS NAVIGATOR 4.3 Manual Download

Page: 98 / 158

Navigator 4.4 Help

Once you have connected with your device, a position should appear on the map (assuming the GPS
device has acquired a signal).

Rotation -

select this feature is you want the map to rotate in the direction of travel. This way your

driving direction is always towards the top of the screen which makes the map easier to read.

Centre -

toggle between keeping your position always visible on the screen and free movement

around the map.

Save Position

- Save your journey to file. You can record your journey and

replay

it at a later date.

GPS info

- Display additional GPS information beneath the map - speed, number of satellites in view

and your latitude and longitude.

Odo

- before you start using the odometer make sure that you have enabled it in

settings

. The

odometer is particularly useful if you want to keep a track of business and/or private mileages. There
are several entries in the

Odo

submenu:

Summary of Contents for NAVIGATOR 4.3































































































































































Search results

Summary of Contents for NAVIGATOR 4.3

Reviews:

Related manuals for NAVIGATOR 4.3

Brands by name

Popular brands

AIRIS NAVIGATOR 4.3, Manual

Search results

Summary of Contents for NAVIGATOR 4.3

Reviews:

Related manuals for NAVIGATOR 4.3

Brands by name

Popular brands