AIRIS NAVIGATOR 4.3 Manual Download

Page: 152 / 158

Navigator 4.4 Help

151

9.9.2

Setting up a local geofence

A local geofence is a function for alarming a vehicle.

In this case a geofence is defined as follows:

- the centre of the geofence is the current position of the vehicle.
- the radius of the geofence is set, by default, to 500 metres.

A vehicle can be "locked" in two ways:
1) Right click on a vehicle in the list and from the context menu select

Send unit settings.

This will bring up the

VTU settings

dialog.

From the

General

tab check the

Local geofence

section.

ee the

Setting up a tracking unit

chapter on setting up a

Local geofence

Once you have set the parameters as you want then click the

Send settings

button to transfer

them to the unit.

Summary of Contents for NAVIGATOR 4.3































































































































































Search results

Summary of Contents for NAVIGATOR 4.3

Reviews:

Related manuals for NAVIGATOR 4.3

Brands by name

Popular brands

AIRIS NAVIGATOR 4.3, Manual

Search results

Summary of Contents for NAVIGATOR 4.3

Reviews:

Related manuals for NAVIGATOR 4.3

Brands by name

Popular brands