AIRIS NAVIGATOR 4.3 Manual Download

Page: 19 / 158

Using Navigator

Click the + next to a layer to see all its sub-layers. Simply select which layers to show/hide by toggling
the check box next to them. Click

to exit and keep the changes.

2.3.2

Search

The search tab allows you to search all map databases, except postcodes (

see postcode tab

). By

initial Search tab looks like this.

This allows you to search all databases for name of the location you are looking for. To find Abbey
Road type 'Abbey Road' and click the

Search!

button. You do not have to type the full name. For

example typing just 'Abbey' will find Abbey Road but it will also find Abbey Street, Abbey Lane and so
on. The more you type the more precise the result will be.

Show categories

By default Navigator searches through all databases. So typing 'Abbey' will not only search for all

Summary of Contents for NAVIGATOR 4.3































































































































































Search results

Summary of Contents for NAVIGATOR 4.3

Reviews:

Related manuals for NAVIGATOR 4.3

Brands by name

Popular brands

AIRIS NAVIGATOR 4.3, Manual

Search results

Summary of Contents for NAVIGATOR 4.3

Reviews:

Related manuals for NAVIGATOR 4.3

Brands by name

Popular brands