AIRIS NAVIGATOR 4.3 Manual Download

Page: 42 / 158

Navigator 4.4 Help

Keeping the GPS icon on screen

When a GPS signal is received your position will be automatically displayed on the map.

To keep your position always on screen select

Tools/GPS/Centre GPS

from the menu. This is

selected by default.

One unique feature that navigator has, is the ability to rotate the map as you drive. This way your
driving direction is always towards the top of the screen which makes the map easier to read. To
enable/disable this feature select

Tools/GPS/Rotate map

from the menu. This is selected by default.

To reset the map to north up select

Tools/Reset map rotation to north up

from the menu.

2.7

Exporting to PDA

2.7.1

Exporting from Navigator

To export maps from Navigator to Pocket PC device (ARM only) select

Tools/Export to PDA

from the

Summary of Contents for NAVIGATOR 4.3































































































































































Search results

Summary of Contents for NAVIGATOR 4.3

Reviews:

Related manuals for NAVIGATOR 4.3

Brands by name

Popular brands

AIRIS NAVIGATOR 4.3, Manual

Search results

Summary of Contents for NAVIGATOR 4.3

Reviews:

Related manuals for NAVIGATOR 4.3

Brands by name

Popular brands