AIRIS NAVIGATOR 4.3 Manual Download

Page: 123 / 158

CarPC interface

122

CarPC interface

If you use a touch screen in your car then Navigator Plus and Professional lets you select a CarPC
mode for easy control and input.

To initiate the CarPC mode select

View/CarPC mode

from the main program menu.

The interface should change.

Only the blue buttons are available for use.

You can select a navigation destination in any of the following ways:

User object

- search through user objects like pushpins or imported databases.

Object

- search through the internal Navigator databases (Cinemas, Museum, Streets etc)

Address

- search for a postcode or street name

Home

- navigate to your

Home point

(if you have already set one up)

Last destination

- Navigate to the last selected destination

If you select Home or Last destination then navigator will automatically initiate the navigation process
to that point.

To exit CarPC mode click the down arrow on the main screen. Click the cross symbol to exit
Navigator (note that next time Navigator will again start in CarPC mode).

Navigating to an object/ user object

Summary of Contents for NAVIGATOR 4.3































































































































































Search results

Summary of Contents for NAVIGATOR 4.3

Reviews:

Related manuals for NAVIGATOR 4.3

Brands by name

Popular brands

AIRIS NAVIGATOR 4.3, Manual

Search results

Summary of Contents for NAVIGATOR 4.3

Reviews:

Related manuals for NAVIGATOR 4.3

Brands by name

Popular brands