Agilent Technologies N9360A, Programming Manual

Page: 97 / 180

Programming Command Reference
5
N9360A Multi UE Tester W-CDMA Programming Manual 5-51
Frequency
TESTs:MANual:RFCH:FREQuency <real>
TESTs:MANual:RFCH:FREQuency?
This command sets the frequency and can be used in Stand-by
or Connection status.
When RFCH is set in the Connection status, handover will
starts. (However, if the value of RFCH is set to the same value as
the one currently set, handover will not start.)
The allowable range and preset values are as follows:
This query command returns the set frequency of RFCH with
real. The range of the value is same as that of the command
parameter.
TESTs:MANual:RFCH:FREQuency <int 1>, <real 2>
TESTs:MANual:RFCH:FREQuency?
This command sets a Band and frequency for RF (uplink) in
Stand-by or Connection status.
When RFCH is set in the Connection status, handover will
starts. (However, if the value of RFCH is set to the same value as
the one currently set, handover will not start.)
<int 1>
is a Band and set to 1 at preset.
<int 2>
is a frequency
(uplink frequency) and set to
1922400000
at preset. The
allowable ranges are as follows:
Table 5-4
Frequency Allowable Range and Preset Value
Band Allowable Range [Hz] Preset Value
1 1920000000 to 1980000000 in 2000 step 1922400000
6 830000000 to 84000000 in 2000 step
832500000, 837500000 832400000
Table 5-5
Band and Frequency Allowable Range
Band Allowable Range
1 1920000000 to 1980000000 in 2000 step
6 830000000 to 84000000 in 2000 step
832500000, 837500000