Agilent Technologies N9360A, Programming Manual

Page: 132 / 180

6-8 N9360A Multi UE Tester W-CDMA Programming Manual
6
Programming Command Summary
Configuration : Test Condition Screen
The following commands are used to set the controls and
parameters associated with the [Configuration : Test Condition]
screen.
Location Update
CONF:SEQ:SIGN:LOCUOFF|LU1|LU2
CONF:SEQ:SIGN:LOCU?
MS Call
CONF:SEQ:SIGN:MSCA ON|OFF|1|0
CONF:SEQ:SIGN:MSCA?
Talk Test (MS Call)
CONF:SEQ:SIGN:TALK ON|OFF|1|0
CONF:SEQ:SIGN:TALK?
BS Call (AMR)
CONF:SEQ:SIGN:BSCA:AMR ON|OFF|1|0
CONF:SEQ:SIGN:BSCA:AMR?
Talk Test (AMR)
CONF:SEQ:SIGN:TALK:AMR ON|OFF|1|0
CONF:SEQ:SIGN:TALK:AMR?
BS Call (RMC)
CONF:SEQ:SIGN:BSCA:RMC ON|OFF|1|0
CONF:SEQ:SIGN:BSCA:RMC?
RF Test
CONF:SEQ:SIGN:RFTEST ON|OFF|1|0
CONF:SEQ:SIGN:RFTEST?
Table 6-5 SEQuence Command Summary
Item Command
Table 6-6 CONDition Command Summary
Item Command
Radio System
CONF:COND:RFOR W-CDMA
CONF:COND:RFOR?
Band
CONF:COND:BAND <int>
CONF:COND:BAND?
Averaging
CONF:COND:AVER OFF|<int>
CONF:COND:AVER?
BS Level
CONF:COND:AMPL <real>
CONF:COND:AMPL?
BER Frames
CONF:COND:SENS:FRAM <int>
CONF:COND:SENS:FRAM?
Limits
Open Loop TX Power
CONF:COND:LIM:OPEN <real LO>,<real HI>
CONF:COND:LIM:OPEN?