Agilent Technologies N9360A, Programming Manual

Page: 57 / 180

Programming Command Reference
5
N9360A Multi UE Tester W-CDMA Programming Manual 5-11
Command Reference Test Screens
Automatic Test Screen
DISPlay:AUTO:STBY 1|2
This command selects the Automatic Test [Stand-by] screen.
The parameter specifies a Sequence Number.
Manual Test Screen
DISPlay:MANual:STBY
This command selects the Manual Test [Stand-by] screen.
TX Analyzer Screen
DISPlay:TXANalyzer:STBY
This command selects the TX Analyzer [Stand-by] screen.
Signal Generator Screen
DISPlay:RFGenerator
This command selects the [Signal Generator] screen.
Command Reference for Configuration Screens
System Configuration Screen
DISPlay:CONFigure
This command selects the [Configuration] screen. The
parameters and controls on this screen set the fundamental
information for all function modes of the Tester.
NOTE
Parameters of Serial Port, GP-IB and Ethernet are not programmable but
manually settable.