Agilent Technologies N9360A, Programming Manual

Page: 69 / 180

Programming Command Reference
5
N9360A Multi UE Tester W-CDMA Programming Manual 5-23
This command defines whether or not to include Sensitivity Bit
Error Rate (BER) tests in the test sequence.
<int>
is a sum of
the values of all the 6 bits as follows.
bit 0 (1): For testing RFCH1
bit 1 (2): For testing RFCH2
bit 2 (4): For testing RFCH3
bit 3 (8): For testing RFCH4
bit 4 (16): For testing RFCH5
bit 5 (32): For testing RFCH6
The choices for each bit are
1
for Run and
0
for — (skip). At
preset, this is set to
63
.
This query command returns the setting of Sensitivity BER test
with integer. The meaning of the return value is same as that of
the command parameter.
RF Input Attenuation
CONFigure:SEQuence:LOSS:RFIN:CHANnel1 <<
<real 1>,<real 2>,<real 3>,<real 4>,<<
<real 5>,<real 6>
CONFigure:SEQuence:LOSS:RFIN:CHANnel1?
CONFigure:SEQuence:LOSS:RFIN:CHANnel2 <<
<real 1>,<real 2>,<real 3>,<real 4>,<<
<real 5>,<real 6>
CONFigure:SEQuence:LOSS:RFIN:CHANnel2?
CONFigure:SEQuence:LOSS:RFIN:CHANnel3 <<
<real 1>,<real 2>,<real 3>,<real 4>,<<
<real 5>,<real 6>
CONFigure:SEQuence:LOSS:RFIN:CHANnel3?
CONFigure:SEQuence:LOSS:RFIN:CHANnel4 <<
<real 1>,<real 2>,<real 3>,<real 4>,<<