Agilent Technologies N9360A, Programming Manual

Page: 153 / 180

Sample Program
7
N9360A Multi UE Tester W-CDMA Programming Manual 7-9
Table 7-4 Program Comments
Row Description
2: Declares the variables to store test results.
4: Erases the status field.
7: Queries the manufacturer, model number, serial number and revision number of the firmware.
8-11: Displays the manufacturer, model number, serial number and revision number of the firmware in the status
field.
14: Resets the Tester to the default setting for programming.
15: Activates the Loss correction function.
16: Sets the Loss RF IN field.
17: Sets the Loss RF OUT field.
18: Sets the 3GPP System.
19: Sets the Band and RFCH.
20: Sets the Band and RFCH.
23: Selects the measurement value screen.
26: Starts the Automatic Test.
27: Directs a user: Turn on the mobile phone.
28: Waits until the location update is completed.
29: Directs the user: Please MS Call.
30: Waits until the state is Talk test.
31: Directs the user: Talk.
32-36: Confirms PASS/FAIL of the voice loop-back test.
Displays the test results, input to the Tester from the PC by the user, on the screen of the Tester.
37: Directs the user: Please MS Release.
38: Waits until the MS Release is completed.
39: Directs the user: Please off hook.
40: Waits until the state is Talk test.
41: Directs the user: Talk.
42-46: Confirms PASS/FAIL of the voice loop-back test.
Displays the test results, input to the Tester from the PC by the user, on the screen of the Tester.
48: Waits until the measurement is completed.
51: Defines the variable of channel number for the measurement result display.
52: (-76:) For channel = 1 to 1.